A Fair Crack of the Whip

clay teapot on a tea boat

I was drinking my early morning pot of green tea when a thought occurred – I’d only used the tea boat from the clay teaware collection I picked up in Stockholm last month. The teapot, fairness cup / tea pitcher, and those teacups all remained untested.

True, I’d done a rudimentary pour test using cold water with the teapot, but I felt that perhaps I should give it the benefit of the doubt and see how it performed with hot water and tea inside it.

small clay teapot

I had time to kill, so got the kettle on, and rinsed all the bits and pieces off in warm water, to ensure any loose clay particles or dust were removed.

With a more expensive / better quality pot I would of course take the time to season it properly, but with a cheap and cheerful item like this that seemed a bit over the top.

I decided that using one of the better quality teas with it at this testing stage was a bit risky, so after a rummage through the tea cupboard hit upon the idea of trying it out with a mini Pu-erh beeng cha. The 3g disk was just about perfect for the 100ml capacity of the pot.

Once the kettle boiled, I set to work.

tea pot steeping

The teapot leaked a bit around the lid when pouring, but once I found out that the best technique involved getting it into a vertical position as quickly as possible over the pitcher, then that hardly seemed to matter. Any lid leakage simply ran down the spout and into the pitcher.

To ensure a good, clean infusion as well as a fast, even pour I used a tea-tool to even out the layer of leaves in the bottom of the pot and keep the spout unblocked between steepings.

I’d read that unglazed clay tea pitchers can cause the temperature of the finished tea to drop rather quickly, and that was the case here. If you were serving to many guests, that wouldn’t be a problem, as the tea would soon be out of the pitcher and into the cups before it cooled down too much, but if serving to 1 or 2 people, then you’d quickly notice the 2nd or 3rd cup had cooled down a little too much.

The cups themselves at 20ml were perhaps just a little on the small size to comfortably drink the tea in the usual three sips demanded by gong fu etiquette.

The pot and pitcher didn’t seem to have affected the taste of the tea in any harmful way.

All in all pretty well much what I expected for the price. Nothing you’d pull out to impress guests, but still OK for when you fancy a change in your usual tea-making routine.

clay tea cup and tea pitcher

Advertisements
This entry was posted in review, tea diary, tea making techniques, teaware and tagged , , , , , , , . Bookmark the permalink.

5 Responses to A Fair Crack of the Whip

  1. pinkiebag says:

    It is a cute tea pot. I never knew that clay caused a quicker temperature drop. Not I have one, Chloe.
    https://pinkiebag.com/

    Liked by 1 person

    • I’d only heard about it before this – I remember seeing a video where you were warned not to use a clay pitcher to cool boiling water down for use in making green tea as it would drop too much too fast – glass was recommended instead.

      Compared to a similar sized pitcher of porcelain the difference is really noticeable…

      Liked by 1 person

  2. I am so intrigued by this tea tool! How does it work? I always have issues with my spout getting clogged when I use my cute little Yixing pot.

    Liked by 1 person

    • The general idea is to insert the pointed tapered end down the spout from the outside.

      Hopefully this should push any leaves blocking the spout at its base inside the pot away from the opening.

      They can then be redistributed inside the pot with the spatula like end.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s